Tray 2 is empty or installed in the wrong way. Please check the tray 2.
 Pull
the tray 2 out of the machine.
 Open
the paper cover.
 Enlarge
the tray 2 by adjusting the paper width guide.
 Flex
the paper sheets back and forth to separate the pages and then
dan them while holding one edge. Tap the edges of the stack on a
flat surface to even it up.
 Load
paper with the print side up.
 Squeeze
the paper length guide and slide in it until it lightly touches
the end of the paper stack.
 Close
the paper cover.
 Fully insert the tray 2 until you hear "clicking" sound.
|
