 Open
and close the front cover. The jammed paper is automatically
ejected from the machine.
 Gently
pull the paper out of the output tray.
 Open
the rear cover.
 If
you see the jammed paper, pull it straight up. Skip to step 8. If you still do not see the paper, go to the next step.
 Pull
up the fuser lever.
 Open
the scan unit.
 Carefully
take the jammed paper out of the machine.
 Lowering
down the scan unit gently and slowly until it is completely
closed. Make sure that it is securely latched.
Be careful not to pinch your fingers!
 Pull
down the fuser lever.
 Close
the rear cover. Printing automatically resumes.
|
