Paper Jam at the paper exit area  
 
 


If you cannot see the flash animation, click here		  
   If a long portion of the paper is visible, pull it straight out. Open and close the front cover firmly. The machine will resume printing.
If you cannot find the jammed paper, or if there is any resistance removing the paper, stop pulling and go to step 2.

   Open the scan unit.

   Open the cover of reverse unit using the handle on it and carefully take the jammed paper out of the machine.
If there is any resistance removing the paper or difficulty picking up jammed paper, stop pulling and turn the release knob to the direction as shown to remove the misfed paper.

   Close the cover of reverse unit.

   Lowering down the scan unit gently and slowly until it is completely closed. Make sure that it is securely latched.
Be careful not to pinch your fingers!
If you cannot find the jammed paper, or if there is any resistance removing the paper, stop pulling and go to step 6.

   Open the rear cover and carefully take the jammed paper out of the machine.

   Close the rear cover.